This quotation service is provided to assist in the planning of your marble or granite project.
Please read the instructions below, and should you wish please complete the online 'request for quotation' form below and submit to us and we will reply.
You will need to tell us which features you want on your worktops. The diagram shows some typical features for a kitchen worktop. If there is something else you want which is not shown let us know and we will be happy to quote you for it, just give us a call if in doubt. There is the facility to upload your plans and drawings.
Informations & Features we need from you:
Make sure you put all your contact details on the sheet. We will then give you a quote by return. We need to know if you are the company (contractor) or end-user.
If a kitchen company or bathroom company are fitting your units, please tell us which one.
Job Location Floor - Level or Stairs (ground floor, 1st floor, 2nd floor, etc.)
Roughly sketch the worktop you want us to quote, with dimensions (in mm), and send, with this enquiry as a file upload or e-mail/fax if you prefer preferably, fax it to us. Please see a sample drawing.
Please make sure that you show which edges need to be polished, and give details of any upstands, splashbacks, hobs etc.
The location of any sinks and what type they are (top-mount or under-mount)
For sinks, the choice is Belfast or Butler, Under-mounted and standard Inset
With Belfast, Butler or Under-mounted you have the choice of having a set of drainer grooves and/or a recessed drainer area.
The Drainage grooves set has usually 5 grooves at a length of 450mm on either one or both sides of the sink.
Under-mounted bowls are best supported in the units themselves using an MDF sub-base.
What type of material you would like to use (granite, marble, etc.)?
What color of stone (for some examples of colours click here: Material Gallery)?
What edge detail (to choose edge detail click here: (Services, Installation and Cutting page)?
The location and size (height) of any backsplashes (if applicable).
The location and size of any Hob-upstand (if applicable).
The location of any cooktops or stoves and what type they are ( drop in, free standing, slide in)
Is Templating & Fitting required or not?